福建11选5走势图

丝印机厂家

福建11选5走势图Contact: Mr。 Yang, 13925789871

Mr. Hu, 13509020493

Tel: 0769-82600378

Mailbox: imdiml@163.com

Company website: www.ctpanews.com

Address: No. 4, Hongye Middle Road, Yongtou, Chang'an Town, Dongguan, Guangdong, China

website:en。dglichao。cn


Roll-to-roll CCD alignment precision printing machine

details

Roll-to-roll CCD alignment precision printing machine

Roll-to-roll CCD alignment precision printing machine

Host characteristics

For PET, PVC, PC, transfer paper (film), flower paper, nameplate, PCB/FPC, mobile phone buttons, 3M glue, membrane switch, solar battery, trademark laser, scratch card, LED light bar, not dry Screen printing of adhesive labels, stainless steel, aluminum foil, copper foil, etc., as well as processing in industries such as IMD/IML in-mold decorative plastics.

1. Adopting the industrial camera CCD camera positioning function, the platform XYθ can automatically capture and locate, and the printing precision is 0.03 ~ 0.05mm.

2. The printing feed adopts the tension correction method to ensure smooth material.

3, using Mitsubishi servo printing pull material to ensure the quality of equipment.

4, printing speed of 600 ~ 800 impressions per hour (depending on the size of the product)。

 

Second feeder characteristics

1. Automatically discharge waste and automatically tear off the protective film device;

2, coil material installation, adjustable tension air expansion shaft;

3, feeding shaft, variable frequency motor drive, the initial speed of discharge can be adjusted at will, the starting frequency slowly rises from 0 to run, avoiding too fast start, causing surface scratches on the material;

4, static bar, equipped with static elimination function;

 

Three light box characteristics

1. Taiwan Yangming photoelectric switch control;

2。 The pre-press material enters the bin and then enters the printing press;

3。 The post-press material enters the bin and then enters the oven;


 

Four printing host features

Overfeed rack: dust remover

Printing table: vacuum suction, air table

Countermeasure correction: stepper motor drive linear module

Correction positioning: industrial camera CCD camera control

(X-axis, Y-axis, XY-axis line and rotary precision movement)


Printing drive: servo motor

Printing machine head left and right guide: linear guide

Pull drive: servo motor

Printing positioning: industrial camera CCD camera

Pulling traction shaft: rubber-coated suction roller shaft, printing inspection platform

Operation interface: touch screen operation

       

Five dryer characteristics

1. Feed the suction plate to control the tension;

2, multi-zone heating, circulating hot air drying, automatic constant temperature, each zone can be freely set temperature, under the same temperature control, the temperature of each zone is the same;

3, the inverter automatically receives the material, the oven is 45 meters / 60 meters dry;

4。 Silicone sleeve roller shaft can make the material have no metal contact during baking, avoiding deformation of printed matter under special shutdown conditions and ensuring printing quality;

5, static bar, equipped with static elimination function;

Six technical parameters


name

model

LC-5070

Host parameter

Maximum feed width(mm)

410

Maximum printing area(Length mm × width mm)

Length: 300-500mm Width: 200-400mm 

Maximum frame area(length mm × width mm)

1000×700

Minimum frame area (length mm × width mm)

500×300

Printing thickness (mm)

0。03-0。38

Minimum print hop (mm)

5

CCD positioning accuracy (mm)

±0.02

CCD intermediate spacing (mm)

300±20 horizontal, 400±40 vertical (can be customized)

Printing host operating voltage (V)

380

Host maximum power (KW)

2.5

Working pressure (kg/cm2)

4-8

Color accuracy range (mm)

±0.03-0.05

Host size (length × width × height) mm

2900×1250×1650

Oven parameter

Oven temperature range (°C)

Normal temperature-130

Oven working voltage (V)

380

Drying length (m)

45/60

Oven maximum power (KW)

24

Maximum winding diameter (mm)

500

Oven size (length mm × width mm × height mm)

2300×1050×2000

Feeder parameters

Discharge maximum roll diameter (mm)

500

Feeder working voltage (V)

220

Feeder maximum power (KW)

0.3

Total length of machine(M)

7


Related label:Roll-to-rollCCDalignmentprecisionprintingmachine

Recently Viewed:

Related products:

Related news:

s
e
r
v
i
c
e
share 一键分享
福建11选5走势图 福建11选5 福建11选5走势图 福建11选5 福建11选5走势图 福建11选5走势图 福建11选5 鼎汇彩票 福建11选5开奖结果 福建11选5